Ph.D. Positions

Even though self-pulsating laser diodes are supplied by a DC current, their output is characterised by an emission of pulses at a regular frequency, called the self-pulsation (SP) frequency. This frequency can vary depending on the structure of the laser and its working conditions.  Frequencies within the range of 300 MHz up to 164 GHz have been reported in the literature. Self-pulsating lasers are currently used in compact disc optical data storing systems, due to their low coherence length which reduces the errors due to interferences. In 1989, these self-modulating lasers became of interest for optical communication systems when it was demonstrated that SP lasers synchronise to a return-to-zero optical signal. This is a useful property for clock recovery applications in which the information can be kept in its optical format. The signal is split into two parts, one of which is injected into the SP laser in order to synchronize the pulses emitted to the incoming data rate. The output of the SP laser is now called the clock signal. There are a couple of key features of the SP laser that have to be mentioned. Firstly, the SP lasers are insensitive to optical feedback. Secondly they can be synchronised over a large frequency range, and so, can be used for data being transmitted over a large frequency range. This can lead to an implementation of this component in different scale size networks. Thirdly, the SP lasers can operate over a wavelength range of more than 13 nm. All of these features are highly advantageous for any clock recovery application in WDM and OTDM networks. In the literature different types of SP lasers, Fabry-Perot, distributed feedback or distributed Bragg reflector lasers exhibit these different features to varying degrees. It has been demonstrated that the fast SP frequencies (>3 GHz) are due to the presence of effective differential gain. Based on this theory, a new type of DBR SP laser has been designed. I have a new type of SP device which is a multi-section DBR laser allowing control over the SP behaviour, the wavelength and the SP frequency. The laser is designed to achieve the state of the art, exhibiting the highest frequency and largest wavelength tunability. The aims of this project are to study the physics of the hybrid laser and to assess its performance for potential applications in OTDM or DWDM systems.  

The candidates are invited to email their CV including a covering letter at landaisp@eeng.dcu.ie.

 

Back to main page